CodeVisionAVR: Porovnání verzí
Bez shrnutí editace |
Bez shrnutí editace |
||
Řádek 23: | Řádek 23: | ||
===Ovládání motoru=== | ===Ovládání motoru=== | ||
<code> | |||
PŘÍLOHA 10 | PŘÍLOHA 10 | ||
/************************** | /************************** | ||
Řádek 212: | Řádek 212: | ||
} | } | ||
} | } | ||
</code> |
Verze z 26. 4. 2011, 08:47
www
http://www.hpinfotech.ro/html/cvavr.htm
Getting Started with the CodeVisionAVR C Compiler
Úlohy pro začátky
Blikání LED
Ovládání LCD
Ovládání motoru
PŘÍLOHA 10
/**************************
Chip type : ATmega16
Program type : Application
AVR Core Clock frequency: 18,423000 MHz
Memory model : Small
External RAM size : 0
Data Stack size : 256
**************************/
#include <mega16.h>
#include <stdio.h>
#include <stdlib.h>
#define F_CPU 18423000
#include <delay.h>
#define ADC_VREF_TYPE 0x60
int hrana;
bit por0;
//Deklarace globálních proměnných
unsigned int read_adc(unsigned char kanal) {
ADMUX=kanal;
ADCSRA|=0x40;
while ((ADCSRA & 0x10)==0);
ADCSRA|= 0x10;
return ADCW;
}
void main(void)
{
// Input/Output Ports initialization
// Port A initialization
PORTA=0x00;
DDRA=0x00;
// Port B initialization
PORTB=0x00;
DDRB=0x00;
// Port C initialization
PORTC=0x00;
DDRC=0xC0;
// Port D initialization
PORTD=0x00;
DDRD=0b11111111;
// Timer/Counter 0 initialization
// Clock source: System Clock
// Clock value: Timer 0 Stopped
// Mode: Normal top=0xFF
// OC0 output: Disconnected
TCCR0=0x00;
TCNT0=0x00;
OCR0=0x00;
// Timer/Counter 1 initialization
// Clock source: System Clock
// Clock value: Timer1 Stopped
// Mode: Normal top=0xFFFF
// OC1A output: Discon.
// OC1B output: Discon.
// Noise Canceler: Off
// Input Capture on Falling Edge
// Timer1 Overflow Interrupt: Off
// Input Capture Interrupt: Off
// Compare A Match Interrupt: Off
// Compare B Match Interrupt: Off
TCCR1A=0x00;
TCCR1B=0x00;
TCNT1H=0x00;
TCNT1L=0x00;
ICR1H=0x00;
ICR1L=0x00;
OCR1AH=0x00;
OCR1AL=0x00;
PŘÍLOHA 10
OCR1BH=0x00;
OCR1BL=0x00;
// Timer/Counter 2 initialization
// Clock source: System Clock
// Clock value: Timer2 Stopped
// Mode: Normal top=0xFF
// OC2 output: Disconnected
ASSR=0x00;
TCCR2=0x00;
TCNT2=0x00;
OCR2=0x00;
// External Interrupt(s) initialization
// INT0: Off
// INT1: Off
// INT2: Off
MCUCR=0x00;
MCUCSR=0x00;
// Timer(s)/Counter(s) Interrupt(s) initialization
TIMSK=0x00;
// USART initialization
// USART disabled
UCSRB=0x00;
// Analog Comparator initialization
// Analog Comparator: Off
// Analog Comparator Input Capture by Timer/Counter 1: Off
ACSR=0x80;
SFIOR=0x00;
// ADC initialization
// ADC Clock frequency: 575,719 kHz
// ADC Voltage Reference: AVCC pin
// ADC Auto Trigger Source: Free Running
// Only the 8 most significant bits of
// the AD conversion result are used
ADMUX=ADC_VREF_TYPE & 0xff;
ADCSRA=0xA5;
SFIOR&=0x1F;
// SPI initialization
// SPI disabled
SPCR=0x00;
// TWI initialization
// TWI disabled
TWCR=0x00;
DDRC=0b00000011;
DDRA=0b00000000;
PORTC=0b00000011;
delay_ms(200);
PORTC=0b00000001;
delay_ms(200);
PORTC=0b00000010;
delay_ms(2000);
hrana=(read_adc(0)+read_adc(1))/2;
PORTC=0b00000000;
while(1){
if ((read_adc(0)<hrana)*(read_adc(1)<hrana)*(read_adc(2)<hrana)*(read_adc(3)<hrana)){
PORTD=0b00100111;
};
if ((read_adc(0)>hrana)*(read_adc(1)<hrana)*(read_adc(2)<hrana)*(read_adc(3)<hrana)){
PORTD=0b01101011;
};
if ((read_adc(0)<hrana)*(read_adc(1)<hrana)*(read_adc(2)<hrana)*(read_adc(3)>hrana)){
PORTD=0b01101011;
};
PŘÍLOHA 10
if ((read_adc(0)<hrana)*(read_adc(1)>hrana)*(read_adc(2)<hrana)*(read_adc(3)<hrana)){
PORTD=0b01011011;
}
if ((read_adc(0)<hrana)*(read_adc(1)<hrana)*(read_adc(2)>hrana)*(read_adc(3)<hrana)){ PORTD=0b00100111;};
if ((read_adc(0)<hrana)*(read_adc(1)<hrana)*(read_adc(2)>hrana)*(read_adc(3)<hrana)){
PORTD=0b00100111;
};
if ((read_adc(0)>hrana)*(read_adc(1)>hrana)*(read_adc(2)>hrana)*(read_adc(3)> hrana)){
if (por0){
PORTD=0b01011011;
delay_ms(100);
PORTD=0b01101011;
delay_ms(2000);
por0=0;}else{
PORTD=0b00100111;
delay_ms(200);
por0=1;
};
};
if ((read_adc(0)<hrana)*(read_adc(1)>hrana)*(read_adc(2)>hrana)*(read_adc(3)<hrana)){
PORTD=0b01100011;
};
if ((read_adc(0)>hrana)*(read_adc(1)>hrana)*(read_adc(2)<hrana)*(read_adc(3)<hrana)){
PORTD=0b01010001;
};
if ((read_adc(0)<hrana)*(read_adc(1)<hrana)*(read_adc(2)>hrana)*(read_adc(3)>hrana)){
PORTD=0b00100110;
};
if ((read_adc(0)<hrana)*(read_adc(1)>hrana)*(read_adc(2)>hrana)*(read_adc(3)>hrana)){
PORTD=0b00100110;
};
if ((read_adc(0)>hrana)*(read_adc(1)>hrana)*(read_adc(2)>hrana)*(read_adc(3)<hrana)){
PORTD=0b00100101;
};
}
}