MCU 8051 IDE

MCU 8051 IDE
popis:	Vývoj aplikace pro 8051 v asm nebo C
vývojář	Martin Ošmera
aktuální verze	1.4 (2011)
OS	Unix-like, Microsoft Windows, freeBSD
typ softwaru	aplikační
licence	GNU General Public License
web	mcu8051ide.sf.net wiki Download Download

Example

Write to Port

start: mov A,#01010101b mov P3,A acall delay mov A,#10101010b mov P3,A acall delay sjmp start delay: mov R0,#01h ; 108 ms skok1: mov R1,#100 skok2: mov R2,#250 skok: DJNZ R2,skok DJNZ R1,skok2 DJNZ R0,skok1 ret end

#include <at89x51.h> void _delay_ms(unsigned int msec) //for 11.0592Mhz crystal { unsigned int i,j; for(i=0;i<msec;i++) { for(j=0;j<110;j++); } } void main () { while(1) { P3 = 0x55; _delay_ms(100); // 100 ms P3 = 0xAA; _delay_ms(100); } }

Read from Ports

 	org 0 ;pseudoinstrukce umistujici program do pameti programu pocitace adresou 000h

start:  	
	mov A,#P1
	mov P3,A
	sjmp start

Runing Light

	org 0 ;pseudoinstrukce umistujici program od 00h

  	mov P3,#11111110B	;0. bit na log "0"
loop:	mov A,P3
	rlc A	 		;posun obsah A přes C doleva
	mov P3,A
	acall delay	 	;zavolá podprogram pro zpoždění 1s
 	sjmp loop	 	;skočí zpět k rotaci P1
 	  	  
delay:	mov R0,#01h		;podprogram zpoždění
skok1:	mov R1,#01h
skok2:	mov R2,#01h
 
skok:	djnz	R2,skok
	djnz	R1,skok2
	djnz	R0,skok1
 
	ret 	 
	end

Runing Light C

#include <at89x51.h> #define LED P2_3 void main() { int i; while(1) { if (LED) { LED = 0; } else { LED = 1; } { for(i=0;i<10000;i++); } } }

#include <at89x51.h> #include <delay.h>   void main() {    while (1)    {       P1=0xff;       _delay_ms(50); // 50 ms       P1=0x00;       _delay_ms(50); // 50 ms    } } /* file delay.h contains: unsigned int i,j; void _delay_ms(unsigned int msec) // crystal 10 059 kHz { for(i=0;i<msec;i++) for(j=0;j<110;j++); }

7 segment

	MOV DPTR,#TAB 	;ulozi adresu cislic do DPTR
nastav:	MOV R5,#0	;nastaveni prvni cislice
zobraz:  MOV A,R5	;presun cislice z R5 do A
	MOVC A,@A+DPTR	;vybere prislusnou hodnotu pro A
	MOV P3,A		;presum hodnoty na port
	INC R5		;zvysi cislo v R5 o 1 
	CJNE R5,#10,zobraz
	SJMP nastav

TAB:	DB 0C0h,0F9H,0A4H,0B0H,99H ;0,1,2,3,4,
	DB 92H,82H,0F8H,80H,90H    ;5,6,7,8,9,
	end

7 segment v2

	mov R6,#10    
START:	djnz R6,NEXT
	mov R6,#10
	mov R5,#0
NEXT:	mov DPTR,#TAB
	mov A,R5
	movc A,@A+DPTR
	mov P3,A
	inc R5
	sjmp START

TAB:	DB 0C0H,0F9H,0A4H,0B0H,99H ;0,1,2,3,4,
	DB 92H,82H,0F8H,80H,90H   ;5,6,7,8,9,
	end

7 segment - C

__sfr __at (0xB0) P3;

#define DELAYTIME   15 //Defined delay time constant, originally 65000
unsigned int temp1;

void delay(unsigned int temp)//Delay process
{
  while(--temp);
}

void main()
{
        P3=255;	//led is off  HGFEDCBA = "1"
        while(1)
	{
                P3=0Xc0;		//0 HG = "1" OFF
		temp1=DELAYTIME;
		delay(temp1);

		P3=0XF9;		//1 BC = "0" = ON
		temp1=DELAYTIME;
		delay(temp1);
		}
}

7 segment - C (tab)

#include <at89x51.h>

__code unsigned char out[16] = {0xC0,0xF9,0xA4,0xB0, //0,1,2,3
			        0x99,0x92,0x82,0xF8, //4,5,6,7
			        0x80,0x90,0x08,0x03, //8.9.A.B
			        0x46,0x21,0x06,0x0E};//C,D,E,F
void main(void)
{
    __data unsigned char i = 0;

     while (1) // program loop
     {
          P3 = out[i++];
          if (i==16)
               i=0;
     }
}

Two 7-segment

	 MOV	DPTR,#TAB	 

tens: 	 MOV	P0,#00000010B
	 MOV	R5,#01H			
units:	 MOV	R3,#00H		 
next:	 MOV	A,R3			 
	 MOVC	A,@A+DPTR	 
	 MOV 	P2,A
	 ACALL	delay				 
	 INC	R3				 
	 CJNE	R3,#10D,next
	 MOV	A,R5
	 MOVC	A,@a+dptr
	 MOV	P0,A
	 INC	R5
	 CJNE	R5,#11D,again
	 SJMP	tens
again:	 SJMP	units			 	
			
delay:	MOV	R2,#06D		 
temp2:	MOV	R1,#255D		 
temp1:	MOV	R0,#255D		 
	DJNZ	R0,$         
	DJNZ	R1,temp1		 
	DJNZ	R2,temp2		 
	RET			
			
TAB:	DB 00000010B	;0x02 	0D
	DB 10011111B	;0x9F	1D		
	DB 00100100B	;0x24	2D		
	DB 00001100B	;0x1C	3D		
	DB 10011000B	;0x98	4D
	DB 01001000B	;0x48	5D
	DB 01000000B	;0x40	6D		
	DB 00011110B	;0x1E	7D		
	DB 00000000B	;0x00	8D		
	DB 00001000B	;0x0F	9D					
END

Counter

	MOV	TMOD,#00000001B
  	MOV	TH0,#00H
  	MOV	TL0,#00H
  	SETB	TR0

	MOV DPTR,#TAB 	;ulozi adresu cislic do DPTR
nastav:	MOV R5,#0	;nastaveni prvni cislice
zobraz:  MOV A,R5	;presun cislice z R5 do A
	MOVC A,@A+DPTR	;vybere prislusnou hodnotu pro A
	MOV P3,A		;presum hodnoty na port
	INC R5		;zvysi cislo v R5 o 1 
	acall test
	CJNE R5,#10,zobraz
	SJMP nastav

test:
;	ACALL	ZPOZD
 	JNB     P1.0,$		;bit P1.0=0 skok na sebe sama
; 	ACALL	ZPOZD
 	JB	P1.0,$		;bit P1.0=1 skok na sebe sama
	ret

ZPOZD:	MOV		R0,#05H
SKOK:	JNB		TF0,$
	CLR		TF0
 	DJNZ		R0,SKOK
 	RET

TAB:	DB 0C0h,0F9H,0A4H,0B0H,99H ;0,1,2,3,4,
	DB 92H,82H,0F8H,80H,90H    ;5,6,7,8,9,
	end

www

8051