AplTVY3-B3-1sk-4T

HW: Arduino realizace: Maxa David Charvát Jakub Lukáš Jílek

Robot Arduino

Úkoly:

• Sestavte robota, napište program a vyzkoušejte proto, aby robot:

se pohyboval vpřed do vzdálenosti 1m

int motor_left[] = {6, 7}
int motor_right[] = {8, 10}
 
void setup() {
Serial.begin(9600);
int i;
for(i = 0; i < 2; i++){
pinMode(motor_left[i], OUTPUT);
pinMode(motor_right[i], OUTPUT);
 
drive_forward();
delay(6200);
motor_stop();
Serial.println("1");
 
}
}
 
void loop() {
 
}
 
void motor_stop(){
digitalWrite(motor_left[0], LOW);
digitalWrite(motor_left[1], LOW);
 
digitalWrite(motor_right[0], LOW);
digitalWrite(motor_right[1], LOW);
}
 
void drive_forward(){
digitalWrite(motor_left[0], HIGH);
digitalWrite(motor_left[1], LOW);
 
digitalWrite(motor_right[0], HIGH);
digitalWrite(motor_right[1], LOW);
}

se pohyboval vpřed ve čtyřúhelníku o straně cca 0,5m

int motor_left[] = {6, 7};
 
int motor_right[] = {8, 10};
void setup() {
Serial.begin(9600);
int i;
for(i = 0; i < 2; i++){
pinMode(motor_left[i], OUTPUT);
pinMode(motor_right[i], OUTPUT);
}
}
 
void loop() {}
 
drive_forward();
delay(3200);
motor_stop();
Serial.println("1");
 
turn_left();
delay(420);
motor_stop();
Serial.println("3");
 
motor_stop();
delay(1000);
motor_stop();
Serial.println("5");
 
}
 
 
void motor_stop(){
digitalWrite(motor_left[0], LOW);
digitalWrite(motor_left[1], LOW);
 
digitalWrite(motor_right[0], LOW);
digitalWrite(motor_right[1], LOW);
delay(25);
}
 
void drive_forward(){
digitalWrite(motor_left[0], HIGH);
digitalWrite(motor_left[1], LOW);
 
digitalWrite(motor_right[0], HIGH);
digitalWrite(motor_right[1], LOW);
}
 
void turn_left(){
digitalWrite(motor_left[0], LOW);
digitalWrite(motor_left[1], HIGH); 
digitalWrite(motor_right[0], HIGH);
digitalWrite(motor_right[1], LOW);
}